OEM LOOMHarness identification sheet
Send to johnny.zhao@oemloom.com · WhatsApp +86 138 8000 9663
Four photographs make the difference: the label on the old loom, the face of each main connector showing the pin count, the loom laid out on the floor, and the VIN plate.
Vehicle
| Make / model | |
|---|---|
| VIN (17 characters) | |
| Chassis / generation code | |
| Engine code and displacement | |
| Transmission (manual / automatic) | |
| Steering side (LHD / RHD) | |
| Market of first registration | |
| Body style (single cab / dual cab / van / chassis cab) |
Harness
| OEM part number from the label | |
|---|---|
| Label location and colour | |
| Number of main connectors | |
| Assemblies needed (full set / engine / body / dash / chassis / rear) | |
| Any option codes on the label |
Damage
| What the customer reports | |
|---|---|
| When the fault appears (hot / cold / wet / over bumps) | |
| Repairs already attempted | |
| Photographs taken (label, connectors, loom layout, VIN plate) |
Order
| Quantity per part number | |
|---|---|
| Destination port or address | |
| Required date | |
| Sample needed before the batch? (yes / no) |
What happens next
- We confirm the chassis variant and the assembly list against the drawing we hold, or quote from your photographs.
- You receive a circuit list, connector list, wire gauge table and 2D layout for approval.
- Sample in 7–10 days after approval; production in 25–30 days from drawing sign-off.
MOQ 50 sets per part number. One unit accepted as a paid sample. The drawing and document set are delivered with the order and remain yours.